×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

Z925M EFI MOWER

ZTrak™ Zero-Turn Mower
commercial-zero-turn-ztrak-mowers


Apply For FinancingBuy OnlineMaintenance Plans

60 Day Promise



Features



Specifications


Accessories and Attachments

Lighting

Front light kitFront light kit

The front light kit provides the ability to mow at twilight, increasing productivity hours.

 

Includes instructions, two lights, and mounting hardware.

Miscellaneous

Beacon light kitBeacon light kit

This light kit signals that unit is approaching. The light is positioned on top of the canopy or on rollover protective structure (ROPS) with a breakaway bracket; this ensures that, if struck, the light will not break but will move out of the way.

Rear hitchRear hitch

The rear hitch acts as a mounting point for rear and tow-behind attachments:

  • The hitch can install directly to the engine shroud of a Z900 without the cast-iron bumper or with the cast-iron bumper installed.
  • Z900 models all have a 400-lb (181-kg) towing capacity.

The jack for the mid-mount mower allows easy access to the underside of the mower for maintenance or blade changing while in the field. The kit contains everything necessary to install the jack onto the front of a mower.

The jack for the mid-mount mower allows easy access to the underside of the mower for maintenance or blade changing while in the field.

Jack kit and jack installedJack kit and jack installed
Jack in storage positionJack in storage position

The front frame member is pre-drilled to accept the optional jack kit and jack:

  • The jack makes servicing the underside of the mower deck more convenient.
  • Placed in the storage position, the jack can be carried on the machine.
    • The jack must be removed when using a material collection system to allow installation of the front ballast weights.

 

NOTE: AE32971 jack is included in the kit. The kit contains everything necessary to install the jack onto the front of a mower.

Sun canopySun canopy

Not compatible with beacon light kit.

 

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Sun canopy

Order number: LPA11548

Trash receptacle kitTrash receptacle kit
Trash receptacle kit with pick stick and bucketTrash receptacle kit with pick stick and bucket

The trash receptacle kit provides mounting for 5-gal. (19-L) bucket and trash-grabbing apparatus (not included). It enables trash pickup and storage without having to leave the mower seat. 

 

The kit also keeps the bucket out of the way and away from the trim side of mower. The bucket attaches quickly and easily with purchased elastic straps:

  • Strong, long lasting, and will meet a variety of operator needs
  • Saves time - allows the operator to continue mowing while picking up debris
  • No more plastic trash bags hanging from the mower
  • No more shredded paper on the lawn
  • Saves money - accommodates debris that can cause damage to a mower

 

Mulch Kits

Mulch kitMulch kit
Mulch kit shown on Estate ZTrak™ mower deckMulch kit shown on Estate ZTrak™ mower deck

The mulching attachment allows converting the mowers so they can be used to perform the mulching function (grass or leaves) of this system.

The attachment consists of special mulching blades, mulch baffles to direct the clippings into the blade for recutting, and a discharge closure and hardware. The adjustable baffle can be moved to one of five positions to match conditions using the convenient wing nuts.

 

Operating tips when mulching:
  • Mow when the grass is dry.
  • Observe the one-third rule.
    • No more than one-third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass. If the desired cut height cannot be achieved by cutting off one-third, or there is clumping of the clippings, it may be required to cut higher; wait a day, then lower the mower and make a second pass.
  • Mow at proper intervals - approximately every four days to five days.
  • Always mow with sharp blades.
Mulch kitMulch kit
Mulch kit shown on Estate ZTrak™ mower deckMulch kit shown on Estate ZTrak™ mower deck

The mulching attachment allows converting the mowers so they can be used to perform the mulching function (grass or leaves) of this system.

The attachment consists of special mulching blades, mulch baffles to direct the clippings into the blade for recutting, and a discharge closure and hardware. The adjustable baffle can be moved to one of five positions to match conditions using the convenient wing nuts.

 

Operating tips when mulching:
  • Mow when the grass is dry.
  • Observe the one-third rule.
    • No more than one-third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass. If the desired cut height cannot be achieved by cutting off one-third, or there is clumping of the clippings, it may be required to cut higher; wait a day, then lower the mower and make a second pass.
  • Mow at proper intervals - approximately every four days to five days.
  • Always mow with sharp blades.

Seat

Padded armrests installed on seatPadded armrests installed on seat

The padded armrest kit provides extra comfort for the operator.

NOTE: The padded armrest kit is only compatible with the mechanical suspension seat provided on the ZTrak™ Z740R Mower.

Base seat panBase seat pan
Isolated seat panIsolated seat pan

The field-installed isolated seat kit for the gas Z900 ZTrak Mowers provides operators with an improved ride and reduces operator fatigue when mowing for prolonged periods of time.

 

This is a dealer-installed kit that converts a base seat with no suspension to an isolated seat.

 

It is compatible with all model year 2015 and newer gas Z900 ZTrak Mowers with base seats that have no suspension and a serial number break of (30,000-).

Fully-adjustable, mechanical-suspension seat optionFully-adjustable, mechanical-suspension seat option

The field-installed suspension seat kit provides operators with maximum ride comfort and reduces operator fatigue when mowing for prolonged periods of time. 

This is a dealer-installed kit that converts a base seat with no suspension to a suspension seat.

Spark Arrester

Spark arrester mufflerSpark arrester muffler
Spark arrester muffler screenSpark arrester muffler screen

A spark arrester screen is available to meet current law in areas requiring use of mufflers under certain conditions or where needed to comply with local ordinances.

 

Includes instructions, a spark arrester screen, and mounting hardware.

Striping Kits

Striping kit - 72 in. (183 cm) shownStriping kit - 72 in. (183 cm) shown
StripesStripes

Striping kits are available for all B, E, M, and R Series Mowers. These kits utilize a rubber flap to achieve the striping effect on lawns. Different types of grass will stripe differently.
 
Striping kits mount behind the deck and can be adjusted for best performance.